 |
|
Hard drive profile
 |
| Date added: |
2004-11-01 |
Posted by: |
eyesaw |
| Brand: |
Western Digital |
Firmware: |
N/A |
| Model number: |
WD600AB |
Manufacture date: |
N/A |
| Model name / serie: |
N/A |
Buffersize: |
2 MB |
| Drive size: |
60 GB |
RPM: |
5400 |
| PS2 version: |
v7 |
Progam(s): |
N/A |
| Adaptor model: |
Ethernet Only |
|
|
 |
| Model picture (exact model) |
|
| Additional notes: |
|
Report this entry - Edit |
Had to remove the cover plate of the network adapter.
Remove all jumpers, otherwise the drive is not recognized (Set to Single, see http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=712&p_created=1037285347&p_sid=m-7Y4pph&p_lva=84&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3NlYXJjaF90eXBlPXNlYXJjaF9mbmwmcF9wcm9kX2x2bDE9OTEmcF9wcm9kX2x2bDI9JnBfY2F0X2x2bDE9MTg1JnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9V0Q2MDBBQg**&p_li= )... |
Comments
| #1 - posted by P (69.244.19*.*) | 2008-07-09 05:29:47 |
| Removing the cover of the plate wasn't enough for me. I also had to file down a sizable chunk of the molex adapter. (Actually, I couldn't find a file, so I heated up an old screw driver with a blow torch and melted it down.) But everything seems to be working now. |
| #2 - posted by SithBoxer (96.18.20*.*) | 2010-04-01 14:04:55 |
| Removing the cover plate also wasn't enough for me. However, I just whipped out my precision Torx screwdriver (Network Adapter uses T7 screws) and unscrewed the molex power plug on the adapter so everything would fit. Worked perfectly. |
| #3 - posted by SithBoxer (96.18.20*.*) | 2010-04-01 14:10:02 |
| Correction on the Torx size.... the PS2 Network Adapter uses T6 screws. |
| #4 - posted by
(68.184.9*.*) | 2011-06-24 23:40:27 |
| i didnt have to modify anything to make it fit( still had to take the covor off), but it was a very tight fit. but my adaptor has the ethernet and phone line ports. |
|
